Ducted Fume Hood FH(X) series
Brand: 
Kazkaz Technologies
Product origin CHINA
Delivery time Within 7 days
Supply capacity Factory Direct Supply
Model FH1000(X) FH1200(X) FH1500(X) FH1800(X)
Introduction:
Fume Hood is a kind of negative pressure ventilation system for protecting operator and laboratory environment. Room air flows inward from the front opening of the Fume Hood and is consistently ventilated by the extract blower. Therefore, contaminated fumes, vapors, toxic gasses, aerosol and corrosive substance which are probably generated during experiments could be prevented from spreading to the operator or into the laboratory room. In addition, the polluted air could be purified by the active carbon filter before exhausting through the duct. Thus, the outdoor environment could also be protected.
Features:
1. UV lamp for sterilization.
2. Motorized front glass window.
3. Resistant to weak acid and alkali.
4. Adjustable air speed: 9 levels.
5. Alarm when filter working time 3500 hours.
6. With memory function in case of power-failure.
7. Back side air compensation, to avoid turbulence in work area.
8. 8°slope front ergonomics design, fatigue-free working posture.
9. Microprocessor control system, LED display shows filter working time.
10. Transparent side glass windows maximize light and visibility inside the cabinet, providing a bright and open working environment.
Technical Parameters:
Technical Parameters:
| Model | FH1000(X) | FH1200(X) | FH1500(X) | FH1800(X) |
| External Size(W*D*H) | 1000*840*2150mm | 1200*840*2150mm | 1500*840*2150mm | 1800*840*2150mm |
| Internal Size(W*D*H) | 880*730*745mm | 1080*730*745mm | 1380*730*745mm | 1680*730*745mm |
| Max Opening | 520mm | |||
| Work Surface Height | 750mm | |||
| Blower | Built-in centrifugal blowers, Speed adjustable with 9 levels | |||
| Air Velocity | 0.3~0.8m/s | |||
| System Exhaust Volume | 630m³/h | 780m³/h | 990m³/h | 1210m³/h |
| Noise | ≤68dB | |||
| LED Lamp | 8W*1 | 12W*1 | 16W*1 | 16W*1 |
| UV Lamp | 20W | 30W | ||
| Emission of 253.7 nanometers for most efficient decontamination | ||||
| Front Window | Motorized, 5mm toughened glass, anti-UV | |||
| Exterior Body: Cold-rolled steel with anti-bacteria powder coating | ||||
| Material | Work Table: Chemical resistant phenolic resin | |||
| Waterproof Socket | 1pc | 2pcs | 2pcs | 2pcs |
| Power Supply | AC220V±10%, 50/60Hz; 110V±10%, 60Hz | |||
| Consumption | 400W | 400W | 500W | 500W |
| Standard Accessory | Water tap, Gas tap, Water sink, Base stand, UV lamp*2, LED lamp, Socket, 4.3 meters exhaust duct, Active carbon filter, Foot switch | |||
| Optional Accessory | HEPA filter | |||
| Gross Weight | 230kg | 253kg | 290kg | 340kg |
| Package Size(W*D*H) | 1150*1120*1680mm | 1350*1120*1680mm | 1650*1120*1680mm | 1950*1120*1680mm |
Related Products
Brand: Kazkaz Technologies
Ducted Fume Hood BK-FH1200E
Product origin CHINA
Delivery time Within 7 days
Supply capacity Factory Direct Supply
Model BK-FH1200E
Introduction:
The Ducted Fume Hood is a robust laboratory safety device designed to capture and remove hazardous fumes, vapors, and particles during chemical experiments or industrial processes. By venting contaminated air through an external exhaust system, it provides a secure and efficient environment for handling toxic substances.
Brand: Kazkaz Technologies
Fume Hood FH700
Product origin CHINA
Delivery time Within 7 days
Supply capacity Factory Direct Supply
Model FH700
Introduction:
In the chemical laboratory, the experimental operation will produce a variety of harmful odor gases, bad smell, moisture and corrosive substances, in order to protect the safety of users and prevent contaminants in the experiment from spreading to the laboratory, the fume hood is used in the vicinity of pollution sources.
Brand: Kazkaz Technologies
Ductless Fume Hood FH(T)
Product origin CHINA
Delivery time Within 7 days
Supply capacity Factory Direct Supply
Model FH1200(T)
Introduction:
In chemical laboratories, a lot of odors, moisture and corrosive substances will be generated during the experiment. To protect the safety of users and prevent the spread of pollutants in laboratories, fume hoods are used.
Brand: Kazkaz Technologies
Ductless PP Fume Hood FH1000(PD)
Product origin CHINA
Delivery time Within 7 days
Supply capacity Factory Direct Supply
Model FH700(PD) FH1000(PD)
Introduction:
The Ductless PP(Polypropylene) Fume Hood is a specialized laboratory safety device designed to protect users from harmful fumes, vapors, and dust during chemical handling and experimentation. Unlike traditional ducted fume hoods, the ductless version uses advanced filtration technology to purify the air before releasing it back into the laboratory, eliminating the need for external ducting.
Brand: Kazkaz Technologies
Ducted Fume Hood FH1800(E)(Customized)
Product origin CHINA
Delivery time Within 7 days
Supply capacity Factory Direct Supply
Introduction:
In the chemical laboratory, the experimental operation will produce a variety of harmful odor gases, odor, moisture and corrosive substances, in order to protect the safety of users and prevent the spread of pollutants in the experiment to the laboratory, the fume hood should be used near the source of pollution.
Brand: Kazkaz Technologies
Ductless Fume Hood FH1000(C)
Product origin CHINA
Delivery time Within 7 days
Supply capacity Factory Direct Supply
Model FH1000(C), FH1200(C), FH1500(C), FH1800(C)
Introduction:
In chemical laboratories, a lot of odors, moisture and corrosive substances will be generated during the experiment. To protect the safety of users and prevent the spread of pollutants in laboratories, fume hoods are used
\
Brand: Kazkaz Technologies
Walk-in Fume Hood FH(W) Series
Product origin CHINA
Delivery time Within 7 days
Supply capacity Factory Direct Supply
Model FH1200(W) FH1500(W) FH1800(W)
Introduction:
It is the new technical instrument in air condition workshop and clean workshop. And it is widely applicable in electron, chemicals, mechanism, university and lab. Fume hood can be used in operation of potential risk or unknown infected factors, and the experiment of flammability, explosive volatilization and narcotics. It can protect operator and samples.
Brand: Kazkaz Technologies
Fume HoodBK-FH700
Product origin CHINA
Delivery time Within 7 days
Supply capacity Factory Direct Supply
Model bk-fh700
Introduction:
The Ducted Fume Hood is a robust laboratory safety device designed to capture and remove hazardous fumes, vapors, and particles during chemical experiments or industrial processes. By venting contaminated air through an external exhaust system, it provides a secure and efficient environment for handling toxic substances.
Brand: Kazkaz Technologies
Ductless PP Fume Hood FH700(PD)
Product origin CHINA
Delivery time Within 7 days
Supply capacity Factory Direct Supply
Model FH700(PD) FH1000(PD)
Introduction:
The Ductless PP(Polypropylene) Fume Hood is a specialized laboratory safety device designed to protect users from harmful fumes, vapors, and dust during chemical handling and experimentation. Unlike traditional ducted fume hoods, the ductless version uses advanced filtration technology to purify the air before releasing it back into the laboratory, eliminating the need for external ducting.
Brand: Kazkaz Technologies
Ducted Fume Hood FH700(L) FH1000(L) FH1100(L) FH1200(L) FH1300(L) FH1500(L) FH1800(L)
Product origin CHINA
Delivery time Within 7 days
Supply capacity Factory Direct Supply
Model FH700(L) FH1000(L) FH1100(L) FH1200(L) FH1300(L) FH1500(L) FH1800(L)
Introduction:
Fume hood is used to protect the lab environment and operator during general chemical applications.
It actively protects operator from inhaling toxic vapors and dramatically reduces the risk of fire and explosion. By installing proper filter, it can also protect environment.
Brand: Kazkaz Technologies
PP Reagent/Medicine Cabinet(Ventilated)
Product origin CHINA
Delivery time Within 7 days
Supply capacity Factory Direct Supply
Introduction:
The cabinet is made of 8mm thick porcelain white PP board and seamlessly welded by PP welding rods of the same color and material, which greatly strengthens the structural firmness of the cabinet and effectively reduces the deformation of the cabinet due to thermal expansion and contraction.The PP material has the characteristics of resistance to strong acid, strong alkali and corrosion. lt is safe to store some acid-base reagents and medicines. The laminate is made of 8mm thick high-quality pure PP board and is seamlessly welded by the same color and homogeneous welding rod. There are verticaledges around, and the vertical edges are integrally welded to form. The overall design is movable. lt can be taken out and placed in a suitable compartment for free combination. The front and back of the laminate can be placed, and a certain degree of anti-overflow effect can be obtained from the surrounding standing edges.
Brand: Kazkaz Technologies
KAZKAZ FH(A) Series Air Flow Sensor Ducted Fume Hood
Product origin CHINA
Delivery time Within 7 days
Supply capacity Factory Direct Supply
Model FH1000(A), FH1200(A), FH1500(A), FH1800(A)
Introduction:
Fume Hood is a kind of negative pressure ventilation system for protecting operator and laboratory environment. Room air flows inward from the front opening of the Fume Hood and is consistently ventilated by the extract blower. Therefore, contaminated fumes, vapors, toxic gasses, aerosol and corrosive substance which are probably generated during experiments could be prevented from spreading to the operator or into the laboratory room. In addition, the polluted air could be purified by the active carbon filter (optional) before exhausting through the duct. Thus, the outdoor environment could also be protected.
